1 / 5

Asign Real Carbon Fiber Front Splitter for 2020–2024 Audi A5 S Line & S5 B9.5

Car Model

For Audi A5/S5

Finish

Matte Glossy

In stock

Quantity

$2,099.00 USD

Shipping calculated at checkout.

Fast Shipment

One-year Guarantee

Secure Payments

Real Carbon Fiber · B9.5 Front-End Upgrade

Real Carbon Fiber Front Splitter for Audi A5 S Line & S5

Give your 2020–2024 Audi A5 S line or S5 B9.5 a lower, wider and more performance-focused front profile with a vehicle-specific multi-piece real carbon fiber splitter.

Real Carbon Fiber Glossy or Matte Add-On Installation Professional Fitting Recommended

Quick Answer

This is a vehicle-specific add-on front splitter designed for selected 2020–2024 Audi A5 S line and S5 B9.5 Coupe and Sportback models. It attaches beneath the original front bumper and does not replace the complete bumper. Exact bumper shape must be verified before ordering, and professional installation is strongly recommended.

A More Defined B9.5 Front Profile

The factory B9.5 front bumper already has a clean, technical design, but its lower edge can appear visually restrained. This splitter extends the lower bumper line, adds layered depth and creates a more planted appearance without covering the entire front fascia.

Lower Visual Stance

Extends the lower edge of the bumper to make the front end look wider and closer to the road.

Layered Front-End Detail

The multi-piece profile adds definition around the center section and outer bumper corners.

Coordinated Carbon Fiber

Pairs naturally with carbon fiber mirror covers, bumper accents, side skirts or a rear spoiler.

Add-On Splitter, Not a Replacement Bumper

The splitter is installed beneath and around the original lower front bumper. The factory bumper remains on the vehicle.

This is not a lightweight tape-on decoration. Secure mechanical mounting is required, with automotive installation tape used where appropriate to support alignment and contact surfaces.

Product Specifications

Product Type	Vehicle-specific add-on front splitter
Material	Real carbon fiber
Available Finishes	Glossy carbon fiber or matte carbon fiber
Design	Multi-piece performance-inspired lower bumper profile
Installation Type	Add-on installation with secure mechanical mounting and installation tape where required
Installation Level	Professional installation strongly recommended
Vehicle Modification	Temporary bumper removal or minor fitting adjustment may be required depending on the vehicle and installation method

Choose Your Carbon Fiber Finish

Glossy Carbon Fiber

A deeper reflective surface that makes the carbon weave more visible. Best for vehicles with gloss black trim or other high-gloss carbon fiber exterior parts.

Matte Carbon Fiber

A lower-reflection finish with a more technical and understated appearance. Best for satin, matte or less reflective exterior themes.

For a coordinated build, match the splitter finish with any existing carbon fiber mirror covers, side skirts or rear aero components.

Vehicle Fitment

Designed for selected facelift B9.5 front bumpers. Vehicle year alone is not sufficient for compatibility confirmation.

Model	Body Style	Model Years	Requirement
Audi A5 B9.5	2-Door Coupe	2020–2024	S line front bumper required
Audi A5 B9.5	4-Door Sportback	2020–2024	S line front bumper required
Audi S5 B9.5	2-Door Coupe	2020–2024	Original B9.5 S5-style front bumper
Audi S5 B9.5	4-Door Sportback	2020–2024	Original B9.5 S5-style front bumper

Not confirmed for: pre-facelift B9 models, standard non-S-line A5 bumpers, RS5 models, Cabriolet models, aftermarket replacement bumpers or vehicles with a different lower bumper profile.

Verify Before Ordering

Front bumper configurations can vary by model, trim level, body style and market. Confirm all of the following before production or shipment:

Your vehicle is a facelift B9.5 Audi A5 or S5.
A5 vehicles have the S line exterior front bumper.
Your body style is Coupe or Sportback.
The center opening, outer lower corners and underside match the product photos.
The vehicle does not have an RS5 or incompatible aftermarket bumper.

Recommended photos: one full front view, one front three-quarter view and one close-up of the lower bumper. Send the photos to Asign Customer Support for a fitment review.

Professional Installation Process

The exact procedure may vary according to the bumper, mounting points and installer. The following is a general installation overview rather than a substitute for professional judgment.

Inspect the Components

Check all carbon fiber surfaces and edges before beginning installation.

Test-Fit Every Section

Align the center and outer sections before applying tape or tightening any fasteners.

Prepare the Bumper

Clean all contact areas. Temporary removal of the bumper or lower trim may be required.

Secure the Splitter

Use suitable mechanical fasteners and installation tape according to the mounting surfaces.

Check Alignment

Confirm even positioning, secure mounting and safe clearance before driving.

Installation warning: Do not rely on double-sided tape alone to support a front splitter. Incorrect mounting can cause the component to loosen while driving. Labor, removal and reinstallation costs are not included.

Daily Driving and Ground Clearance

A front splitter projects farther forward and sits lower than the original bumper. The driver must allow additional clearance around:

Steep driveways and parking garage ramps
Parking blocks and high curbs
Speed bumps and uneven road surfaces
Automatic car washes with guide rails
Loading ramps and vehicle transport equipment

Approach steep transitions slowly and at an angle when safe. Impact, scraping, road debris and improper installation are external damage rather than manufacturing defects.

What Is Included

One multi-piece real carbon fiber front splitter assembly
Selected glossy or matte carbon fiber finish
Components shown as part of the selected splitter configuration

Mounting hardware, center insert details and decorative markings may vary by production batch. Confirm package contents with Asign Customer Support before scheduling installation.

Complete the Audi A5/S5 Exterior Theme

Build a coordinated exterior by pairing the front splitter with matching carbon fiber mirror covers, front bumper accents, side upgrades or a rear spoiler in the same finish.

Explore Audi A5 & S5 Upgrades

Frequently Asked Questions

Will this fit every 2020–2024 Audi A5?

No. It is intended for selected B9.5 A5 models with the S line front bumper. Standard non-S-line bumpers must not be assumed compatible.

Does it fit both the A5 Coupe and Sportback?

It is designed for selected Coupe and Sportback configurations, but the exact front bumper must still be verified with photos.

Does it fit an Audi S5?

It is designed for selected 2020–2024 B9.5 S5 Coupe and Sportback models with the matching original front bumper.

Will it fit an RS5?

No. The RS5 uses a different front bumper design and requires a model-specific splitter.

Is this a replacement front bumper?

No. It is an add-on splitter installed beneath and around the original lower bumper.

Is the splitter made from real carbon fiber?

Yes. This listing is for a real carbon fiber splitter available with either a glossy or matte surface finish.

What is the difference between glossy and matte carbon fiber?

Glossy carbon fiber has stronger reflections and more visible weave depth. Matte carbon fiber has a lower-reflection, more understated appearance.

Can it be installed using double-sided tape only?

No. A front splitter requires secure mechanical mounting. Installation tape may support alignment and contact areas, but it should not be the only attachment method.

Does the front bumper need to be removed?

Temporary bumper or lower trim removal may be required to access suitable mounting points and achieve correct alignment.

How can I confirm fitment before ordering?

Send Asign Customer Support clear front, three-quarter and lower-bumper photos together with your model, model year and body style.

Build a More Focused B9.5 Front End

Choose the carbon fiber finish that matches your exterior, verify the front bumper configuration and arrange professional installation for a secure, properly aligned result.

Audi model names are used only to identify vehicle compatibility. This is an aftermarket product and is not manufactured, authorized or endorsed by Audi.

View less

Audi A5/S5 Carbon Fiber Front Splitter – Enhanced Downforce & Protection

Asign Carbon Fiber Front Splitter For B9.5 2020-2024 Audi A5/S5

Asigncar Carbon Fiber Front Splitter For B9.5 2020-2024 Audi A5/S5

FAST SHIPPING

Free Shipping, Fast Deliver, Always

CHAT WITH US

Real Support, Real People, We’re Here to Help.

SECURE PAYMENTS

Encrypted Payments, Trusted & Safe.

Asign x AIG Protection

Coverage for delays, lost packages and damage.

Frequently Asked Questions

What makes Asign different from other brands?

Asign stands out by offering meticulously designed carbon fiber kits that fit seamlessly with a variety of vehicle models. Our commitment to precision, use of high-quality materials, and focus on ease of installation set us apart in the market.

Why should I choose Asign's carbon fiber kits?

A1: Precision Design & Fit

Our design process strictly follows original vehicle specifications to ensure a perfect fit for your car. We approach each product with exceptional care and attention to detail.

A2: High-Quality Materials & Manufacturing
Asign uses the highest precision steel molds for production, reducing errors and maximizing accuracy. We employ pre-impregnated carbon fiber for all our products, making them genuine and lightweight, yet as strong as steel.

A3: Easy Installation & Non-Destructive Removal
Most of our carbon fiber kits can be installed in under 10 minutes (excluding special items like Front Splitters, Rear Diffusers, and Exhaust Tips). Designed for quick installation and removal without damaging your car's surface, our products offer both convenience and flexibility.

How does Asign ensure product quality?

Asign upholds strict quality control standards throughout the production process. We use premium materials and advanced manufacturing techniques, followed by comprehensive testing to ensure every product meets our high standards for performance and durability.

What if I have a quality issue with my product?

If you encounter any quality issues with your Asign product, please contact our customer service team right away. We will promptly address your concerns and offer solutions, including replacements or refunds, as appropriate.

How can I make sure the product I order fits my vehicle?

Before placing an order, carefully check your vehicle's specifications and refer to the product description for compatibility information. If you have any questions or concerns, our customer service team is always available to provide personalized advice and guidance.

What is Asign's return policy?

Our return policy varies depending on the specific product and the reason for the return. Please refer to our website or contact our customer service team for detailed information on our return and exchange procedures.

Cart

Your cart is currently empty.

Asign Real Carbon Fiber Front Splitter for 2020–2024 Audi A5 S Line & S5 B9.5

Real Carbon Fiber Front Splitter for Audi A5 S Line & S5

Quick Answer