Name: Asign Heated Windshield Washer Nozzles for Audi – Left & Right Replacement Pair
Brand: AUDI
Price: 49.9 USD
Availability: InStock

1 / 8

Restore a Wider, More Even Windshield Spray

Replace weak, uneven, or worn factory washer jets with an atomizing left-and-right nozzle set designed for compatible Audi vehicles. Wider fluid distribution helps the wipers clean more of the windshield with fewer concentrated water streams.

Replacement Installation Left & Right Pair Atomized Spray Pattern Adjustable Spray Height

Why Replace Your Washer Nozzles?

Aging or partially blocked washer nozzles can produce narrow streams, uneven coverage, incorrect spray direction, or reduced fluid flow. That can leave dirt, dust, road salt, and insect residue across areas the wipers need to clean.

Wider Mist Coverage

The atomized spray pattern distributes washer fluid across a broader section of the windshield instead of concentrating it into a few narrow streams.

Direct Replacement Design

Replaces the original left and right washer nozzles rather than covering or attaching over the existing parts.

Adjustable Spray Direction

The spray height can be fine-tuned after installation to improve windshield coverage for your specific vehicle.

Heated Connector Support

Built with an electrical connector intended to retain the factory heated-nozzle function on compatible vehicles equipped with a matching connection.

Designed for Everyday Visibility

Proper washer-fluid coverage is especially important when driving through rain, dust, pollen, road spray, mud, snow residue, or winter road salt. The broader mist pattern helps wet the windshield more evenly before the wipers move across the glass.

Functional restoration without exterior modification: these are replacement washer components designed to restore or improve the spray pattern while maintaining a clean factory-style appearance.

Compatible Audi Model Options

Select the corresponding vehicle model when ordering. Compatibility can vary by model year, original nozzle housing, electrical connector, and washer-hose configuration.

A3 A4 A5 A6 A7 A8 S3 S4 S5 S6 S7 RS3 RS4 RS5 RS6 RS7 Q3 Q4 Q5 Q6 Q7 TT

Check Before Ordering

Compare the shape of your original washer-nozzle housing.
Check the washer-fluid hose connector position and size.
Check whether your original nozzle uses an electrical heating plug.
Confirm the selected model matches your vehicle.
If uncertain, contact us with your model year and clear photos of the original nozzles.

Product Details

Product Type	Front windshield washer nozzles
Installation Type	Replacement
Spray Style	Atomized mist spray
Spray Adjustment	Adjustable spray height
Heating Connection	Electrical connector for compatible vehicles equipped with heated washer nozzles
Material	ABS housing
Position	Front left and front right
Color	Black

What Is Included?

1 × Left windshield washer nozzle
1 × Right windshield washer nozzle

Washer fluid, hoses, wiring, tools, and other vehicle components are not included unless specifically shown as part of the selected package.

Replacement Installation

Open the hood and locate the original left and right washer nozzles.
Carefully release the original nozzle clips from the hood or mounting panel.
Disconnect the washer-fluid hose from the original nozzle.
Disconnect the electrical heating plug if the vehicle is equipped with one.
Match the replacement nozzle to the correct left or right position.
Reconnect the fluid hose and compatible electrical connector.
Secure the replacement nozzle into the original mounting position.
Test the washer system and adjust the spray height as needed.

Installation note: do not force the clips, hose connector, or electrical plug. Stop installation if the replacement part does not match the original component.

Frequently Asked Questions

Is this an overlay or a replacement part?

This is a replacement product. The original washer nozzles must be removed before the new left and right nozzles are installed.

Does the package include both sides?

Yes. The set includes one left nozzle and one right nozzle. Install each nozzle in its corresponding position.

Are the left and right nozzles interchangeable?

No. The nozzles are position-specific and should be installed according to their left and right markings.

Does this product support heated washer nozzles?

The nozzles include a heating connector. The heating function can only operate when the vehicle is factory-equipped with a compatible wiring plug and control system.

Can the spray direction be adjusted?

Yes. The spray height can be adjusted after installation to improve washer-fluid coverage across the windshield.

Will this fit every year of the listed models?

Not necessarily. Washer-nozzle housings and connectors can vary between model years and vehicle configurations. Compare the original parts or contact us for a compatibility check before ordering.

What information should I provide for a fitment check?

Provide the vehicle model, model year, and clear photos showing the original nozzle housing, fluid-hose connector, and electrical plug.

Disclaimer: This is an aftermarket replacement product designed for use with compatible Audi vehicles. It is not manufactured, sponsored, endorsed, or supplied by Audi or Volkswagen AG. Brand names and model references are used only to identify product compatibility. Always verify the original nozzle shape and connector configuration before installation.

Mehr ansehen

Weniger ansehen

Asign Windshield Washer Nozzles for Audi Vehicles

Asign Windshield Washer Nozzles for Audi

FAST SHIPPING

Free Shipping, Fast Deliver, Always

CHAT WITH US

Real Support, Real People, We’re Here to Help.

SECURE PAYMENTS

Encrypted Payments, Trusted & Safe.

Asign x AIG Protection

Coverage for delays, lost packages and damage

Frequently Asked Questions

What makes Asign different from other brands?

Asign stands out by offering meticulously designed carbon fiber kits that fit seamlessly with a variety of vehicle models. Our commitment to precision, use of high-quality materials, and focus on ease of installation set us apart in the market.

Why should I choose Asign's carbon fiber kits?

A1: Precision Design & Fit

Our design process strictly follows original vehicle specifications to ensure a perfect fit for your car. We approach each product with exceptional care and attention to detail.

A2: High-Quality Materials & Manufacturing
Asign uses the highest precision steel molds for production, reducing errors and maximizing accuracy. We employ pre-impregnated carbon fiber for all our products, making them genuine and lightweight, yet as strong as steel.

A3: Easy Installation & Non-Destructive Removal
Most of our carbon fiber kits can be installed in under 10 minutes (excluding special items like Front Splitters, Rear Diffusers, and Exhaust Tips). Designed for quick installation and removal without damaging your car's surface, our products offer both convenience and flexibility.

How does Asign ensure product quality?

Asign upholds strict quality control standards throughout the production process. We use premium materials and advanced manufacturing techniques, followed by comprehensive testing to ensure every product meets our high standards for performance and durability.

What if I have a quality issue with my product?

If you encounter any quality issues with your Asign product, please contact our customer service team right away. We will promptly address your concerns and offer solutions, including replacements or refunds, as appropriate.

How can I make sure the product I order fits my vehicle?

Before placing an order, carefully check your vehicle's specifications and refer to the product description for compatibility information. If you have any questions or concerns, our customer service team is always available to provide personalized advice and guidance.

What is Asign's return policy?

Our return policy varies depending on the specific product and the reason for the return. Please refer to our website or contact our customer service team for detailed information on our return and exchange procedures.

Warenkorb

Ihr Warenkorb ist derzeit leer.

Asign Heated Windshield Washer Nozzles for Audi – Left & Right Replacement Pair

Restore a Wider, More Even Windshield Spray